SkyBean 追隨相機安裝套件

Camera Security

We upgraded the design for maximum security of your action camera. Fix the camera in the ChaseCam housing with the silicon band. Silicon band is including in the package. Housing for GoPro Hero Session does not need silicon band.

Design

ChaseCam heads are produced with the newest technology of 3D printing. Those prints are heat sensitive. Do not leave ChaseCam in hot / sunny places for long time. Product can not be exposed to long-term pressure. After using ChaseCam do not leave camera inside and let loose silicon band so it does not deform the head.

Specification

SkyBean ChaseCam weight is only 170 grams. In normal flight (approx. 40km/h), it produces about 1.5N brake force, enough to fly a safe distance from the lines. 

SkyBean ChaseCam is connected to the canopy with bungee rope, stretched only 13% during normal flight, what brings extra safety in case it is accidentally tangled up in the lines. Please read user guide on our support page.

dimensions

Safety

SkyBean ChaseCam was developed especially with a focus on safety. During normal flight, ChaseCam flies behind far enough with no adverse effect on the glider or flight speed. We know, as active pilots, what can happen in the air and because of that, we also tested SkyBean ChaseCam in non standart flight situations. 

When you activate your speed system or when you turn a spiral, increased speed will produce more brake force and the bungee rope will be stretched more, therefore ChaseCam will go further away from the glider, and  then the photo image takes in the entire canopy and pilot. There is some possibility that  ChaseCam will tangle if incorrectly exiting from a spiral, like during a big wing-over. You can see a little kick in what is captured when you enter or leave a strong thermal, but don't worry, safety level is high. Small wing-overs will bring ChaseCam closer to the lines with nice video effect. Really big wingovers can tangle ChaseCam into the lines, but with no safety concern; the photo image will temporarily face elsewhere. During asymmetrical collapse, dynamic or held, the glider is still moving forward, so ChaseCam still produces braking force, so this maneuver won't tangle the ChaseCam. A dynamic frontal stall is usually recovered very quickly with some altitude lost, which will ensure no adverse effect on the ChaseCam's position from the glider. During a B-stall, the glider will lose its forward speed, and therefore ChaseCam can be tangled in the lines, particularly if you pull it dynamically.

Package contains

• Head - camera case 
• Silicon band for fixing the camera
• Bungee rope with clip for canopy connection
• Wings (ChaseCam body)
• Laces (ChaseCam body)
• Velcro (for harness launch)